IMPORTANT NOTICE

Updated: 24-SEP-2003 (Use your browsers' Reload button to ensure you're viewing the most recent version)

To obtain this kit please call the Customer Support Centre or use the FTP site Search for this ECO kit and dependencies Search the Compaq FTP web site this kit (exact match) Search the Compaq FTP web site this or related ECOs

Copyright (c) Digital Equipment Corporation 1994. All rights reserved.

Modification Date:  12-NOV-2001
Modification Type:  Note added regarding this kit is no longer
                    available through SSB.

PRODUCT:    DEC Open3D V1.0 for OpenVMS AXP V1.0

OP/SYS:     OpenVMS AXP

SOURCE:     Digital Customer Support Center

ECO INFORMATION:

     CSCPAT Kit:  CSCPAT_2007 V1.1  (CSCPAT_2007011)
     CSCPAT Kit Size:  3213 blocks
     Engineering Cross References:  OPEN3D010_ECO1, OPEN3D010_ECO2
     Kit Applies To:  DEC Open3D for OpenVMS AXP V1.0
     System Reboot Necessary:  No

***********************************************************************
*                            NOTE                                     *
*                                                                     *
*         THIS KIT IS NO LONGER AVAILABLE THROUGH SSB.                *
*                                                                     *
***********************************************************************

ECO KIT SUMMARY:

An ECO kit exists for DEC Open3D for OpenVMS AXP V1.0
on OpenVMS AXP V1.0. This kit addresses the following
problems:

  o   It is impossible to link an application against an
      older version of PCM$LIBSHR.EXE and run the application
      with a newer version of PCM$LIBSHR.EXE.  This kit replaces
      the newer version of PCM$LIBSHR.EXE (link date and time
      of 23-FEB-1993 10:51) with the older version (link date
      and time of 19-JAN-1993) so that applications linked
      against the older version can execute.  In order to
      verify the version of the PCM shareable library against
      which an application was linked, execute the following
      DCL command:

           $ ANALYZE/IMAGE APPLICATION_EXECUTABLE_NAME

      (This fix is contained in OPEN3D010_ECO1.)

  o   The PXG server SYS$LIBRARY:DECW$SERVER_DDX_GP.EXE has a
      memory leak which may cause the PXG server to hang or
      crash during the execution of MCAD applications.  This
      kit replaces the PXG server SYS$LIBRARY:DECW$SERVER_DDX_GP.EXE
      previously installed.

      (This fix is contained in OPEN3D010_ECO2.)


RELATED ARTICLES:

Detailed articles describing the problems listed above may exist in
the OPENVMS and PHIGS databases. To view these articles, open the
appropriate product database and perform a query using the search
string 'CSCPAT_2007'.


ECO KIT ORDERING INSTRUCTIONS:

If after an evaluation you wish to obtain this kit, request it
electronically using the appropriate Advanced Electronic Services
(AES) Service Tool. If you are not familiar with how to request
kits electronically, open the DIA, WIS or DSNLINK database and
review the article entitled:

   [AES] How To Electronically Request ECO Kits Using Service Tools


INSTALLATION NOTES:

The system/cluster does not need to be rebooted after this kit is
installed.

For the fix in OPEN3D010_ECO1 to take effect, issue the following
DCL command and re-run the application:

   @SYS$STARTUP:PCM$STARTUP

For the fix in OPEN3D010_ECO2 to take effect, you must restart the
PXG server by issuing the following DCL command:

   @DECW$STARTUP RESTART
  
  ==========================================================================
                           Table of Kit Image Information                     |