Updated: 24-SEP-2003 (Use your browsers' Reload button to ensure you're viewing the most recent version)
ALPTTDR02_070 Alpha V6.1-V7.0 SYS$YSDRIVER ECO Summary
Copyright (c) Compaq Computer Corporation 1995, 1999. All rights reserved.
Modification Date: 12-FEB-1999
Modification Type: DOCUMENTATION: Editorial Modification - see NOTE under
"Kit Applies To:" section
PRODUCT: OpenVMS Alpha
COMPONENT: YSDRIVER.EXE
SOURCE: Compaq Computer Corporation
ECO INFORMATION:
ECO Kit Name: ALPTTDR02_070
ECO Kits Superseded by This ECO Kit: ALPTTDR01_062
ECO Kit Approximate Size: Saveset A - 162 Blocks
Saveset B - 54 Blocks
Saveset C - 54 Blocks
Saveset D - 54 Blocks
Cover Letter - 6
Total of 5 files - 330 Blocks
Kit Applies To: OpenVMS Alpha V6.1, V6.1-1H1, V6.1-1H2, and V7.0
NOTE: Fixes in this ALPTTDR02_070 kit for
V6.2 through V6.2-1H3 are superseded by
ALPTTDR02_062.
System/Cluster Reboot Necessary: Yes
ECO KIT SUMMARY:
An ECO kit exists for YSDRIVER.EXE on OpenVMS Alpha V6.1 through
V7.0. This kit addresses the following problem:
Problems Addressed in ALPTTDR02_070:
o Due to a problem with the port-driver-specific flow control
logic, output will not stop until the end of an output burst
when XOFF is received.
Problems Addressed in ALPTTDR01_062:
o TTA0 baud rates below 600 (that is, 50, 75, 150, or 300) do
not work on the ALPHASERVER 2100.
This problem has been fixed in OpenVMS Alpha V7.0.
RELATED ARTICLES:
Detailed articles describing the problems listed above may exist in
the OPENVMS database. To view these articles, open the appropriate
product database and perform a query using either of the following
search strings: 'ALPTTDR02_070' or 'ALPTTDR'.
ECO KIT ORDERING INSTRUCTIONS:
If after an evaluation you wish to obtain this kit, request it
electronically using the appropriate Advanced Electronic Services
(AES) Service Tool. If you are not familiar with how to request
kits electronically, open the DIA, WIS or DSNLINK database and
review the article entitled:
[AES] How To Electronically Request ECO Kits Using Service Tools
INSTALLATION NOTES:
In order for the corrections in this kit to take effect, the system
must be rebooted. If the system is a member of an OpenVMS cluster,
the entire cluster must be rebooted.
==========================================================================
| Table of Kit Image Information |
+----------------------------+----------+-----------------+--------------+
| | Overall | Image File | Image Link |
| Image Name | Checksum | Identification | Date/Time |
+----------------------------+----------+-----------------+--------------+
| SYS$YSDRIVER.EXE | F1F7A08F | X-3 | 23-APR-1996 |
| | | 12:37:51.01 |
+----------------------------+----------+-----------------+--------------+
==========================================================================
| Table of Kit Image Information |
+----------------------------+----------+-----------------+--------------+
| | Overall | Image File | Image Link |
| Image Name | Checksum | Identification | Date/Time |
+----------------------------+----------+-----------------+--------------+
| SYS$YSDRIVER.EXE | 26B8A7EC | X-3 | 23-APR-1996 |
| | | 12:44:22.49 |
+----------------------------+----------+-----------------+--------------+
==========================================================================
| Table of Kit Image Information |
+----------------------------+----------+-----------------+--------------+
| | Overall | Image File | Image Link |
| Image Name | Checksum | Identification | Date/Time |
+----------------------------+----------+-----------------+--------------+
| SYS$YSDRIVER.EXE | D31FC5FA | X-3 | 23-APR-1996 |
| | | 12:28:23.64 |
+----------------------------+----------+-----------------+--------------+
|
